Outer Diameter (mm)

Width (mm)

Height (mm)

Wall Thickness (mm)

Length (m)

Quantity (nos)

Quick Select — Standard MS Sizes

📊 MS Pipe Weight Results

–

Weight / Meter

–

Weight / Foot

–

Single Pipe

–

Total Weight

ℹ️ Based on mild steel density 7.85 g/cm³ (IS standard). Results are for reference only.

MS Pipe Weight Formula

Round MS Pipe Formula

Weight (kg/m) = (OD – Thickness) × Thickness × 0.02466

Where OD = Outer Diameter in mm, Thickness = Wall thickness in mm
Constant 0.02466 = π × density_steel / 1000

Square MS Pipe Formula

Weight (kg/m) = (4 × Width – 4 × Thickness) × Thickness × 0.00785

📐 View All Formulas →

MS Pipe Weight Chart

Standard mild steel pipe weights as per IS:1239 & IS:3589 specifications.

Download MS Pipe Weight Chart

Full chart with all standard sizes for offline reference

About MS Pipe Weight Calculation

Mild Steel (MS) pipes are the most commonly used pipes in construction, fabrication, and industrial applications across India. Calculating the accurate weight of MS pipes is essential for material procurement, transportation cost estimation, structural load calculations, and project budgeting.

Our MS Pipe Weight Calculator uses the standard steel density of 7.85 g/cm³ and the industry-proven formula to give you accurate weight values for all standard IS sizes. Whether you're working with 1 inch MS pipe, 2 inch MS pipe, or larger diameter pipes, this calculator handles it all.

Common MS Pipe Applications

🏗

Structural Construction

Scaffolding, handrails, columns, structural frames

🔧

Fabrication

Gates, grills, furniture frames, machine guards

🚿

Plumbing

Water supply lines, drainage, irrigation systems

🏭

Industrial

Process piping, conveyor frames, equipment supports

MS Pipe Weight — FAQs

What is the weight of 1 inch MS pipe per meter?▼

A standard 1 inch (25.4mm OD) MS pipe with 2.3mm wall thickness weighs approximately 1.38 kg/m. This can vary slightly based on the exact OD and wall thickness used by different manufacturers.

What is MS pipe density used in the formula?▼

Mild steel (MS) has a standard density of 7850 kg/m³ (7.85 g/cm³). This is the value used in the formula constant 0.02466 for round pipes and 0.00785 for square/rectangular pipes.

What is the weight of a 6-meter MS pipe?▼

To find the weight of a 6m MS pipe, multiply the weight per meter by 6. For example, a 48.3mm OD × 3.2mm thick MS pipe weighs approximately 3.56 kg/m, so a 6m length weighs approximately 21.36 kg.

How accurate is this MS pipe weight calculator?▼

Our calculator uses the standard engineering formula with steel density 7.85 g/cm³. Results are accurate for reference purposes. Actual weight may vary ±2-3% due to manufacturing tolerances and surface finish.

Can I calculate MS pipe weight in kg/ft?▼

Yes! Our calculator shows both kg/m and kg/ft (or lbs/ft in Imperial mode). Simply enter your dimensions and the calculator automatically shows weight in all units simultaneously.

🔗 Related Calculators & Resources

📌 Quick Reference

15mm × 2mm 0.64 kg/m

25mm × 2.5mm 1.39 kg/m

50mm × 3.2mm 3.75 kg/m

76mm × 4mm 7.11 kg/m

100mm × 4.5mm 10.89 kg/m

View Full Chart →

🏗 Other Calculators

🟢 GI Pipe Calculator 🟦 Square Pipe Calculator 🔷 Rectangular Pipe Calculator

📐 MS Pipe Formula


            Weight = (OD − t) × t × 0.02466

            unit: kg/m

Full Formula Guide →